Ceiling Fan Installation in OKC.
Indoor, outdoor, high-ceiling, and smart-capable ceiling fans installed to code with proper fan-rated electrical boxes and joist-mounted bracing. We replace existing fans, hang new fans where chandeliers used to be, and add ceiling fans in locations that never had them. OKC metro homes and patios.
A ceiling fan is one of the easiest comfort upgrades. When it's installed right.
Whether you’re replacing a tired old fan, adding cooling to a hot room, or hanging a new fan on the back porch, the install matters more than most people realize. Sound familiar?
Your bedroom is hot at night
The AC runs but the bedroom never feels cool. A ceiling fan moving air across the bed can drop the felt temperature 4-8 degrees, without raising the thermostat.
Your existing fan wobbles or clicks
A wobbling fan is a fan that’s mounted incorrectly, out of balance, or has worn bearings. Either way it’s loud, annoying, and a sign that something will eventually fail.
You want a fan where a chandelier was
Common during dining room or bedroom updates: pulling out a dated chandelier and putting in a modern fan. The electrical box almost always needs to be replaced with a fan-rated one.
The covered patio needs a fan
Oklahoma summers on a covered patio without airflow are unusable. A properly rated outdoor fan (damp-rated for covered, wet-rated for exposed) turns the patio into a real living space.
You want smart fan control
Modern smart fans integrate with Lutron Caseta, Hunter SimpleConnect, Alexa, and Google Assistant: set schedules, control from your phone, voice command for speed and direction.
You want a fan where one never existed
Older homes often lack ceiling fans in bedrooms, dens, or porches. Adding one requires running new wire to the location, installing a fan-rated box, and adding a switch. We handle all of it.
Fan-rated boxes. Joist-mounted bracing. No fan we install will fall.
The single biggest reason ceiling fans fail or fall: they were installed on standard light fixture boxes that aren’t designed for the weight and torque of a spinning fan. National Electrical Code requires fan-rated boxes (UL listed for ceiling fan support) for any fan install, and most DIY jobs we get called to fix didn’t use one. We install the right box for every fan, joist-clamped or bar-braced based on the situation, and balance every fan we hang so it runs smooth and quiet for decades.
We’ve installed ceiling fans across the OKC metro: primary suite fans in Edmond, outdoor patio fans in Norman, great-room high-ceiling installs in Yukon, chandelier-to-fan conversions in Moore, smart-controlled bedroom fans throughout the metro. Same standard everywhere: code-compliant, properly braced, properly balanced.
What you get from us: the right box for your specific install (fan-rated, joist-clamped where needed), the right downrod sized to your ceiling height, the right fan size for your room, a fully balanced install with no wobble, switch or smart control integration, and the kind of clean work that doesn’t require a return visit.
Three steps. From hot room to cool comfort.
Most ceiling fan installs are completed in 1-2 hours. New locations with new wiring take longer.
1. Quick Quote
Tell us what you’ve got: room dimensions, ceiling height, whether you have a fan picked out, whether there’s existing wiring. We can quote most jobs over the phone or with a quick visit. Clear, all-in pricing.
2. Schedule the Install
Most installs are scheduled within a week. We confirm what fan you have or recommend the right size for the room. If you need a new fan-rated box (most installs do), we bring one. If you need a longer downrod for high ceilings, we bring that too.
3. Code-Compliant Install
We protect the room, remove any old fixture, install a proper fan-rated box (joist-clamped or bar-braced), assemble the fan, hang it on the right-length downrod, wire the switch or smart control, balance the blades, and test everything. Clean up before we leave.
How Kelvin Electric Pricing Works
No guessing. Here is how pricing works, so you know what to expect before we arrive.
Service Call: $175
If something isn’t working right, we come out and work to fix it, usually within the first hour. The service call is $175, plus any parts needed. If it looks like the job will run past an hour or is more than a quick fix, we stop, explain what we found, and you decide what happens next.
Quote From Photos or Video: No Charge
For many smaller jobs we can quote from photos or video at no charge. If we arrive and find more than the photos showed, we stop and walk you through what we found before any work begins.
In-Person Quote: $175, Credited to Your Job
If we need to see the job in person, the quote visit is $175. If you choose to move forward with the work, that $175 is credited toward it.
What's included in every install.
A proper ceiling fan install isn’t just hanging the fan. It’s verifying the box rating, installing a fan-rated box if the existing one isn’t, sizing the downrod to the ceiling, balancing the blades, and ensuring the switch and any smart control works correctly.
Here’s exactly what you get when we install your ceiling fan: included in the quoted price, with no surprises at the end.
- Removal of old fan or fixture: Including the old box if it's not fan-rated
- Fan-rated electrical box (UL listed): Joist-clamped or bar-braced per situation
- Joist-mounted bracing for heavy fans: Required for fans over 35 lbs and any high-ceiling install
- Downrod sized to ceiling height: Maintaining 7+ feet clearance to blade tips
- Fan assembly & mounting: Per manufacturer spec, properly torqued
- Switch, dimmer, or smart control: Wall switch, remote, or smart fan control as needed
- Blade balancing: No wobble, no clicking, quiet operation
- New wiring runs where needed: For fans being added in new locations
- Full test & cleanup: All speeds and direction tested before we leave
Every type of ceiling fan: installed for your situation.
Bring your own fan or ask us for sourcing recommendations. We install them all, properly.
Standard Indoor Fans
Bedrooms · Living Rooms · Offices
The most common install: replacing existing fans or adding fans in bedrooms, living rooms, dens, and home offices. 42-54 inch span typical, with light kits or without, dimmer-compatible.
Outdoor & Patio Fans
Damp & Wet Rated
UL damp-rated fans for covered patios protected from rain. UL wet-rated fans for exposed locations like pergolas and gazebos. All-weather materials, corrosion-resistant motors.
High-Ceiling Installs
Vaulted & Two-Story Spaces
Long downrods (24-72 inches) for vaulted ceilings, great rooms, and two-story spaces. Special bracing for installs above 12 feet. Sometimes scaffolding required. We bring it.
Chandelier-to-Fan Conversion
Box Upgrade · New Bracing
Replacing a dining room chandelier or bedroom light with a ceiling fan. Almost always requires upgrading the electrical box to fan-rated and adding bracing. We handle both.
New Location Fans
No Existing Wiring
Adding a ceiling fan in a room or porch that doesn’t have one yet. We run new wire from existing circuit (or new dedicated circuit), install fan-rated box, and add wall switch.
Smart-Capable Fans
Lutron · Hunter · Voice Control
Smart fans with Lutron Caseta, Hunter SimpleConnect, or built-in WiFi for app and voice control. Set schedules, integrate with Alexa or Google Assistant, control speed and direction by phone.
A 30-pound fan spinning over your bed has to be installed right.
Ceiling fans are one of the most DIY’d categories in home improvement, and one of the most common to fail dramatically. The fan over the bed that crashed at 3 AM. The patio fan that started wobbling and slung a blade. The fan that just slowly worked itself loose over years. These aren’t theoretical: they’re things we get called to fix or replace after.
Here’s what we see when we’re called to fix someone else’s ceiling fan install.
What Goes Wrong
- Standard box, not fan-rated: The most common failure. Fan torque slowly works the box loose from the ceiling, and eventually the whole assembly comes down. Code violation and a real safety risk.
- No joist bracing on heavy fans: Fans over 35 lbs (most modern ones) need joist-mounted bracing, not just a fan-rated box. Without it, the assembly sags over time.
- Wrong downrod = unsafe clearance: Code requires 7+ feet from blade to floor. Wrong downrod on high ceilings either puts blades too high to move air, or in low ceilings creates head-strike risk.
- Wrong size for room = ineffective: Tiny fan in a great room moves no air. Oversized fan in a small bedroom is overwhelming and wastes energy. Sizing matters.
- Indoor fan outdoors = corrosion: Indoor-rated fans on covered patios corrode within 6-12 months in Oklahoma humidity. Damp-rated minimum for covered locations.
- Wobble, click, hum: Bad mounting, imbalanced blades, or worn bearings. Annoying, and a sign the install is failing.
Cool, quiet, and safely above your head.
A properly installed ceiling fan is one of those things you stop noticing: exactly because there’s nothing to notice. No wobble, no clicking, no worry. Just air moving when you want it, and quiet stillness when you don’t. The room feels cooler, the AC runs less, and the assembly above your head is mounted to a joist where it’ll stay for decades.
Here’s what daily life looks like after.
Your New Normal
- Rooms feel cooler: Moving air drops felt temperature 4-8 degrees without changing thermostat. AC works less, you sleep better.
- Quiet operation: No wobble, no clicking, no humming. Balanced blades and proper mounting mean you forget the fan is even running.
- Properly secured, joist-mounted: Fan-rated box and bracing means the fan stays exactly where it's installed, for decades.
- Usable patio in summer: Covered patios with proper outdoor fans become real living space again, even in 100° Oklahoma heat.
- Smart control if you want it: Schedules, voice commands, app control. Integrates with Lutron, Hunter SimpleConnect, Alexa, Google.
- Reversed for winter: Most modern fans reverse direction (clockwise) to push warm air down: extending heating efficiency too, not just cooling.
Often paired with ceiling fan installation.
Indoor Lighting
Often paired with ceiling fan projects: coordinating ceiling fans with chandeliers, pendants, and recessed lighting throughout the home for a cohesive aesthetic.
Smart Home Wiring
Pair ceiling fans with Lutron Caseta or Hunter SimpleConnect for scheduling, voice control, and integration with the rest of your smart home setup.
Outdoor Lighting
Outdoor patio fans paired with porch lighting, soffit downlights, and motion-sensor security floods transform the patio into a true outdoor living space.
Ceiling fan installation Across the Oklahoma City Metro
Kelvin Electric serves homes across central Oklahoma. Choose your city for local details.
Common questions homeowners ask.
Don’t see your question? Call (405) 267-7760 and we’ll give you a straight answer.
How does Kelvin Electric charge for service calls and quotes?
A service call is $175, plus any parts, and we aim to fix the problem within the first hour. If it looks like the job will run past an hour or is more than a quick fix, we stop, explain what we found, and you decide what happens next. For many smaller jobs we can quote from photos or video at no charge. If we arrive and find more than the photos showed, we stop and walk you through what we missed before any work begins. If we need to quote in person, the visit is $175, and it is credited toward the work if you choose to move forward.
How much does ceiling fan installation cost in Oklahoma City?
The cost depends on the scope of the work, so we quote it before we start. See how Kelvin Electric pricing works on this page, or call (405) 267-7760 for a quote.
Why do I need a fan-rated electrical box?
Ceiling fans weigh 15-50 pounds and create constant torque while spinning. Standard light fixture electrical boxes are NOT designed to handle that combined load: they're rated for static fixtures only. National Electrical Code requires fan-rated boxes (UL listed for ceiling fan support) for any ceiling fan install. These boxes mount differently (often joist-clamped or bar-braced) and are tested to support the dynamic load of a spinning fan. Without a fan-rated box, the fan will eventually pull free from the ceiling. We've seen the damage.
What size ceiling fan do I need for my room?
General sizing: rooms under 75 sq ft use 29-36 inch fans (small bedrooms, bathrooms); 75-150 sq ft use 42-48 inch fans (standard bedrooms, offices, kitchens); 150-300 sq ft use 50-54 inch fans (living rooms, master bedrooms); 300+ sq ft use 56+ inch fans (great rooms, large primary suites). For high ceilings (over 9 feet) you may want a larger fan to compensate for distance. We help spec the right size during the quote.
How long does the downrod need to be for my ceiling height?
Code requires at least 7 feet of clearance between fan blades and the floor (ideally 8-9 feet for best airflow). For standard 8-foot ceilings, use a flush-mount or short 3-inch downrod. For 9-foot ceilings, use 6 inches. For 10-foot ceilings, use 12 inches. For 11-foot ceilings, use 18 inches. For 12-foot ceilings, use 24 inches. Vaulted and high ceilings often use 36-72 inch downrods. We measure and spec the right downrod length for your specific ceiling height.
Can you install an outdoor ceiling fan on my patio?
Yes. Outdoor ceiling fans require either UL Damp rating (for covered patios protected from direct rain) or UL Wet rating (for open exposed areas like gazebos or pavilions). Using an indoor fan outdoors causes corrosion within months. We install only properly rated outdoor fans, run weatherproof wiring, and install on appropriate fan-rated mounts for exterior conditions.
Can you install a fan in a vaulted or sloped ceiling?
Yes. Vaulted and sloped ceilings require sloped-ceiling-compatible mounts (most modern fans include them or have available adapters) and longer downrods to bring blades down to a proper height. We measure ceiling slope and height during the consultation and spec the right hardware. High ceilings sometimes require scaffolding. We bring it.
Can you replace a chandelier or light fixture with a ceiling fan?
Yes, and this is one of our most common installs. The existing electrical box almost always needs to be replaced with a fan-rated box (the original was rated for a static chandelier, not a spinning fan). We handle the box upgrade, install the fan, and integrate the existing switch or upgrade to a fan-compatible switch. More on indoor lighting fixture work.
Will my existing dimmer or switch work with a new fan?
Maybe: depends on the fan and the switch. Modern fans with separate light and fan controls usually need a fan-rated wall control (not a standard light dimmer, which can damage the fan motor). Smart fans typically come with their own remote or use specific smart switches. We verify compatibility and include any required switching in the quote.
Why does my old fan wobble?
Wobble is caused by one of: bent or warped blades, loose blade screws, imbalanced blade weights, loose mounting hardware, or a worn motor bearing. Sometimes balancing the blades fixes it (we can do that). Often it's a sign the install wasn't done right or the fan is reaching end of life, in which case replacement makes more sense than chasing the fix.
Cool, quiet, safely installed.
Get a quote on ceiling fan installation. Whether it’s a single bedroom fan, a tricky high-ceiling install, or a covered patio outdoor fan, we’ll give you straight pricing and schedule the install for a time that works.
Email: [email protected]